Inner Wear Checklist Before a Shift
Welcome to our store! Discover amazing deals and top products today.
Short answer: Before each shift, confirm the inner wear rule, then check the neckline, sleeves, waist, hem and colour. Make sure nothing shows and nothing bunches when you bend, reach or sit. Fix any fault before you start work, and keep a spare ready.
Key facts
- Confirm the written rule before starting in a new area or after a policy change.
- Check the neckline and sleeve edges in a mirror with the scrub top on.
- Keep one spare inner layer ready in case the first becomes damp, stretched or misshapen.
What should you check before a shift?
Start by confirming the written rule for the area you work in. Then check the layer itself: it should be clean, smooth and free of stretched or thinned areas. Put it on with the scrub top and check the fit in a mirror. Nothing should show at the neckline, sleeves or hem, and nothing should bunch at the waist or underarm.
How do you check the neckline and sleeves?
Look at the neckline from the front and side, with the scrub top fastened. Bend forward and check that the inner edge stays hidden. Check the sleeve edge with your arms down, then lift them to shoulder height. The sleeve should sit under the scrub cuff, not above it, and it should not slide down the arm.
How do you check the waist, hem and colour?
Check the waistband and hem with the scrub pants on. Sit down and stand up, then look for anything that rolls, rides up or shows. Check the colour in daylight or under ward lighting, and compare it with the scrub colour. If the shade stands out, change it or wear a closer one, following your institution's colour rules.
| Check | Pass sign |
|---|---|
| Neckline | Stays hidden |
| Sleeves | Sits under the scrub cuff |
| Waist | Flat and smooth |
| Hem | Hidden when seated |
| Colour | Blends with the scrubs |
What do you do if a check fails?
Fix the problem before the shift if you can. Change to a different size, neckline or length, or swap in your spare layer. If the rule is unclear, ask a supervisor before the first patient or task. Note the fault and the fix, so the next check is quicker. Replace any layer that has stretched, faded or lost its shape.
FAQ
How long does the checklist take?
A first check takes a few minutes in a mirror. Once you know your layer and scrub top, a quick check is often enough. Repeat the full check when you change the layer, the scrub top or the ward.
Do I need the full checklist every day?
A quick version is useful each day, especially after washing, because the neckline and sleeves can change. Run the full checklist when something feels different, or when you start a new role or area.
Can a colleague help with the check?
Yes. A colleague can look at the neckline and sleeve edges from angles you cannot see. Ask them to check when you bend and reach, and keep the check focused on the points in the list.
Related guide: What Are the Common Mistakes With Inner Wear?
Current Top Sellers