Jogger scrubs checklist before a first shift
Welcome to our store! Discover amazing deals and top products today.
Short answer: Before a first shift in jogger scrubs, check the waist, seat, thigh and inside leg against the chart, then test the cuff in the working shoes. Confirm the pocket load and the length by walking and sitting. Record each figure before the order is placed.
Key facts
- Medscrubz, by Misharen Garments in Konni, Kerala, makes scrubs to order, and each piece is stitched after the order is paid.
- Scrub pants come in short, regular and tall lengths.
- Sizes run from XS to 3XL in both the regular fit and the women's fit.
- Scrub fabric is a poly-cotton blend of 65/35 at 180-200 GSM.
Which readings should the checklist start with?
Start with the natural waist, the seat, the thigh and the inside leg. Write each figure in the units used by the chart. Compare each with its own column for the fit chosen. Keep the card with you, so the readings can be checked against the pant when it is tried on, rather than relying on memory.
How should the cuff and shoes be tested?
Test the cuff with the shoes worn on duty. Pull the pant over the shoe, then stand, walk and rise onto the toes. The cuff should clear the shoe without strain, sit just above it and hold its height. If the cuff fails any of these tests, check the leg shape or the length before accepting the size.
How should pockets and the waist be checked?
Load the pockets with the items usually carried, then check that the waist stays level when standing and sitting. Heavy items should sit high and close to the body. A waist that slips after loading needs a review of the pocket layout or the size before the first shift begins.
What should the final check cover before the first shift?
Walk, sit, kneel and bend in the jogger, then check the hem, the waist and the thigh. The leg should hold its taper, the cuff should stay close and the seat should move freely. Repeat the check at the end of the first full day, since some faults appear only after sustained movement rather than in a short test.
- Record the natural waist, seat, thigh and inside leg.
- Compare each figure with its column on the chart for the chosen fit.
- Pull the pant over the working shoe and check that the cuff clears it.
- Load the pockets with usual items and recheck the waist.
- Walk, kneel, bend and sit to test the thigh, seat and hem.
- Repeat the check at the end of the first full day.
FAQ
Does the checklist need repeating for each shoe?
Test the cuff in each working shoe. The hem can sit differently in clogs and trainers, so the test should be repeated for each one worn on duty.
How long does the first check take?
Allow time for a short walk, a few bends and a sit-down test before the shift starts. The end-of-day check takes only a few minutes more.
What if one reading does not match the chart?
Do not force a size. Compare the other readings and choose the size whose figures match most closely. Ask the store to review the readings before the order is placed, since each piece is stitched after payment.
Related guide: How does jogger fit differ for women and men?
Current Top Sellers